Looking for Bambu Lab ABS in Australia?

Bambu Labs ABS comes with NO SPOOL. You will need to twist your other Bambu Labs spool and pull it apart and place this one in.  Also place your RFID tag on the spool so that your Bambu Labs AMS system can auto detect it. Please see diagrams below for more info.

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Recommended Printing Settings

• Drying Settings before Printing - 80 °C，8 h
• Printing and Keeping Container's Humidity - < 20% RH (Sealed，with Desiccant)
• Nozzle Temperature - 240 - 270 °C
• Bed Temperature (with PVP Glue) - 80 - 100 °C
• Printing Speed - < 300 mm/s

Physical Properties

• Density - 1.05 g/cm³
• Vicar Softening Temperature - 94 °C
• Heat Deflection Temperature - 87 °C
• Melting Temperature - 200 °C
• Melt Index - 34.2 ± 3.8 g/10 min

Mechanical Properties

• Tensile Strength - 41 ± 1 MPa
• Breaking Elongation Rate - 41 ± 1 MPa
• Bending Modulus - 1880 ± 110 MPa
• Bending Strength - 68 ± 3 MPa
• Impact Strength - 39 ± 3.6 kJ/m²

Printing Tips

Pungent and unpleasant odors may be released during printing. Make sure your printer is placed in a well-ventilated area.

Print Your Own Spool Now

Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the build-in files!

Instructions for Printed Spool

When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).

Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.

Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.

Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).

Step 2. Tear apart and pull out the plastic strips.

Learn more about swapping the new filament with Bambu Reusable Spool on Wiki,

Included

• 1x Filament & desiccant 
• Instructions & Spool Sticker
• Filament Label

Bambu Labs ABS Colour List:

• Bambu Lab ABS Black
• Bambu Lab ABS White
• Bambu Lab ABS Blue
• Bambu Lab ABS Red
• Bambu Lab ABS Yellow

Browse more

• Browse all
• Browse all 
• Browse all 
• Browse all 
  
• Browse all
• Browse all
• Browse all 
• Browse
• Browse
• Browse
• Browse
• Browse
• Browse  (also PLA )
• Browse
• Browse
• Browse
• Browse  
• Check out all our